Shandong Kuaima  Steel Co., Ltd.

+86-15954941919

GET QUOTATION

202 stainless steel coil

GET QUOTATION
29
26
22
25

Product introduction

Product characteristics

Type 202 stainless steel is an austenitic chromium-nickel-manganese stainless steel designed to protect nickel. Type 202 is a low-cost alternative to traditional Cr-Ni stainless steels, such as 301 and 304. Nickel is replaced by the addition of manganese and nitrogen. It cannot be hardened by heat treatment, but can be cold worked to high tensile strength. type 201 is essentially non-magnetic in the annealed condition and becomes magnetic when cold worked. In many applications, Type 201 can replace Type 301.

Product Form:

Sheet, strip

Typical Applications:

Typical applications for Type 202 are cookware, hose clamps, piston rings, transport truck structural components, transport truck roof/wall panels, thermal window gaskets, airbag containers, and truck trailer posts and door frames.

Processing:

Annealing temperatures for Type 202 range from 1850 - 2000°F. Rapid cooling through the carbide precipitation range (1500 - 800°F) is necessary to keep the carbide in solution and prevent sensitization. type 201 cannot be hardened by heat treatment; it can only be hardened by cold working.

Forming:

Type 202 has similar bending, forming and stretching properties to Type 301 stainless steel.

Welding:

Type 202 can be welded by all conventional methods applicable to 18% Cr, 8% Ni steels. Conventional filler metals for chromium-nickel analysis can be used. As with other austenitic stainless steels with carbon content not controlled below 0.03%, Type 202 is susceptible to intergranular corrosion in the weld heat affected zone.

Corrosion:

Type 202 is resistant to a wide range of mild to moderately corrosive environments. Its corrosion resistance is close to that of Type 301 and has successfully replaced 304 in many mild environments.


stainless steel coil






Place of Origin shandong, China
Brand Name kuaima
Application Building or structual steel
Type Steel Coil, Austenitic,Martenstic, Ferritic, Duplex,, stainless steel Steel Sheet
Standard AiSi, ASTM, bs, DIN, GB, JIS
Width 600mm-1250mm, 600mm-1500mm as required
Length Customers' Requirement, 1-12M as required
Grade 201,304,316 stainless steel, 200 series, 300 series, 400 series 904,duplex2205/2507
Surface Treatment Coated
Tolerance ±1%
Processing Service Bending, Welding, Decoiling, Cutting, Punching
Keyword Ss coil
Thickness 0.25-3mm as required
Surface No.1,No.4, BA, 2B, 8K, HL etc.
Use Metal Roofing Building Steel Material
Delivery time 15 Days
MOQ 1 Ton
Technique Cold Rolled
Special Use High-strength Steel Plate
Model Number 304 316 304L 316L etc.
Packaging Details Tied up with steel strips and wrapped with water proof paper<br><br>thick plates are packed separately, thin plate are packed in bundles
Port Tianjin Port/Shanghai Port

contact us

  • E-mail:Copy
    kuaimashirley@gmail.com
  • Tel:+86-15954941919
  • Facebook:Facebook
  • Twitter:Twitter
  • Address:Liaocheng Economic and Technological Development Zone, Shandong Province, China

get in touch

  • YOUR E-MAIL *

  • subject

  • your request

Contact Info

Let's Connect With Us

We are ready to help at any stage of your project

  • E-mail:Copy

    kuaimashirley@gmail.com

  • Tel:+86-15954941919

  • Facebook:Facebook

  • Twitter:Twitter