- 1100 用于加工要求良好成型性和高耐腐蚀性但不要求高强度的零件，如化工产品、食品工业装置和储存容器、板材加工零件、深拉或旋压凹面容器、焊接零件、热交换器、印刷铭牌、铭牌、反光器具
- 3004 Sheets, thick plates, drawn tubes. Extruded tubes as long as they are used for all-aluminum can bodies, parts requiring a higher alloy than 3003, chemical production and storage devices, thin sheet machined parts, construction baffles, cable ducts, sewers, various lamp parts.
- 3003 sheet. Strip. Foil. Thick plates, drawn tubes. Extruded tubes. Profiles. Bar. Wire. Cold worked bar, cold worked wire, rivet wire, forgings, foil, heat sink material is mainly used for processing parts that require good forming properties, high corrosion resistance, or good weldability, or workpieces that require both these properties and higher strength than 1*** system alloys, such as tanks and tanks for transporting liquids, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil ducts, reflectors kitchen equipment, washing machine cylinders, rivets, welding wire.
- 5052 This alloy has good forming and processing properties, corrosion resistance, candleability, fatigue strength and medium static strength, used in the manufacture of aircraft fuel tanks, fuel pipes, and sheet metal parts of transportation vehicles, ships, instruments, street light brackets and rivets, hardware products, etc.
Aluminum strip is a deep-processed aluminum product formed by slitting and processing aluminum coils. It is an important raw material in the industry.
Depending on the alloying elements contained in the strip, aluminum strip is divided into 8 series, just like aluminum sheet. However, the commonly used series are 1000, 3000, 5000 and 8000 series.
According to the annealing state of aluminum strip, it can be divided into full soft (o-state) semi-hard (H24) and full hard (h18). The most commonly used should belong to the full soft series, because the O state is easier to stretch and bend.
The main processing equipment for aluminum strip is the slitting machine, which can be divided into the required length and width according to the needs. Of course, the equipment for slitting processing is universal and can also be used for processing copper coils, and the processed product is called copper strip.
The international raw material for electronic products is no longer purely dependent on copper tape, because the electrical conductivity of aluminum is just lower than copper, so aluminum tape instead of copper tape is becoming a popular trend in the international.
|Product Name||Aluminum Strip|
|Thickness||0.1mm-6.5mm or as your requirement|
|Width||As per your requirements|
|Length||As per your requirements|
|交货时间||订单确认后 7-30 天|
|价格条款||FOB CIF CFR EXW|
|付款条件||低于 1000000 美元：TT 30% 定金，余额与提单副本|
|钠||超过 1000000 美元：TT 10% 定金，余额 90% 即期信用证|